Product Description
Features:
- Combination hammer chuck for hammer drilling and chiselling
- Metabo VibraTech (MVT): integrated damping system and side handle to reduce vibrations in order to protect the user’s health
- Vario-Tacho-Constamatic (VTC)-Full Wave Electronics for work with materials requiring customized speeds, which remain constant under load
- Thumbwheel for pre-selection of the speed and impact rate
- Electronic soft start for precise spot-drilling
- Optimum heat dissipation and low weight thanks to die cast magnesium gear housing
- Metabo S-automatic safety clutch: mechanical decoupling of the drive for safe working should the drill stop unexpectedly
- Wear Indication for Carbon Brushes
Technical data:
| Model | 600687420 |
| Rated Input Power | 1010 W |
| Max. single blow energy (EPTA) | 7.5 J |
| Maximum impact rate | 3200/min |
| Drill-Ø concrete with hammer drills | 40 mm / 1 9/16″ |
| Drill-Ø masonry with core bits | 90 mm / 3 9/16″ |
| No-Load Speed | 200-350/min |
| Revolutions at Rated Load | 920/min |
| Torque | 95 Nm / 841 in-lbs. |
| Bit Retainer | SDS-max |
| Weight (without power cable) | 6.2 kg / 13.7 lbs. |
| Cable Length | 4 m / 13 ft. |
| Collar diameter | 60 mm / 2 3/8″ |
| Vibration | |
| Hammer drilling concrete | 13.5 m/s² |
| Uncertainty of Measurement K | 1.5 m/s² |
| Chiseling | 11.5 m/s² |
| Uncertainty of Measurement K | 1.5 m/s² |
| Noise Emission | |
| Sound Pressure Level | 95 dB(A) |
| Sound power level (LwA) | 106 dB(A) |
| Uncertainty of Measurement K | 3 dB(A) |
Please Contact Us at our Machinery Department for further inquiries.
